Tel:
China Cartridge Polypro Tile Grout P-30 manufacturer
Perflex Novel Materials Changsha Co.,Ltd

Grouing & tiling system researcher and provider
Join Us: sales@perflex.com.cn

Home ProductsPolyaspartic Flooring Coating

Polyaspartic Flooring Topcoat PF863

Polyaspartic Flooring Topcoat PF863

    • Polyaspartic Flooring Topcoat PF863
    • Polyaspartic Flooring Topcoat PF863
    • Polyaspartic Flooring Topcoat PF863
  • Polyaspartic Flooring Topcoat PF863

    Product Details:

    Place of Origin: China
    Brand Name: Perflex
    Certification: ISO14001:2004/ISO9001:2008
    Model Number: PF863

    Payment & Shipping Terms:

    Minimum Order Quantity: 10kg
    Delivery Time: 7days
    Payment Terms: T/T or L/C at sight
    Supply Ability: 2000Ton/year
    Contact Now
    Detailed Product Description

    Polyaspartic Flooring Coating PF863

     

    1. PRODUCT NAME  PF863 Polyaspartic Flooring Topcoat 

    PA64

    2. PRODUCT DESCRIPTION

    Polyaspartic Flooring PF863 is a low VOC and minimal-odor fast- curing two-part polyaspartic aliphatic polyurea sealer/finish coating for both decorative and protective applications. The material is applied in single or multiple coats by brush, roller or squeegee varying thicknesses to a variety of substrates including concrete and metal. It can be applied as a top coat employed within seamless multi-build chip/quartz seamless flooring systems. Important characteristics of PF863 are its rapid-cure capabilities, high bond strength and UV resistance.

     

    PF863 provides optimal impact, abrasion, and chemical resistance characteristics. Suitable for high traffic applications. The material is ideal for use as a primer, intermediary coating, or clear topcoat sealer within interior resinous flooring applications requiring minimal installation odor.

     

    3. TECHNICAL DATA

    Applicable Standards and Test Methods

    ASTM D638, ASTM D522, ASTM D968

    Physical Properties

    POTLIFE: 20-25 Minutes

    Mixing Ratio: 1.0 Part A; 1.0 Part B by Volume

    Hardness: SHORE D 60

    Tensile Strength: 28 mpa

    Compressive Strength: 80 mpa

    Impact Resistance: PASS

     

    4. INSTALLATION

    Surface Preparation

    Surfaces to be coated must be free of grease and any other contaminants that may impede adhesion. Always check the surface for any bond inhibitors prior to application. Any repairs must be addressed prior to application and should be repaired in accordance with ICRI standards. A moisture emission measurement system is necessary to assess the moisture drive of a concrete slab prior to installation of any toppings or coatings. The transmission rate must not exceed three pounds per 1,000 square feet per 24 hours. The relative humidity of the slab must not exceed 75% as tested per ASTM F2170 Relative Humidity in Concrete Slab test. If there is a moisture emission situation in excess of the above rate, use Moisture Vapor Barrier. The application process will depend on the system being installed,

     

    • ADVANTAGE

    § Walk-on in hours, 24-hour return to service

    § Low VOC

    § Excellent abrasion, impact & wear resistance

    § UV-Resistant; retains optical clarity of clear sealer/finish

    § Low temperature cure (25°F/-4°C)

    § Excellent chemical & stain resistance

    § Resistant to hot-tire pickup

    § Micro-Media agents can be introduced as traction additives

    § Tolerant to 300°F (149°C) for random, incidental heat contact

    • PACKAGE

    Part A: 20kgs pail

    Part B: 20kgs pail

    n Shelf Life

    12 months unopened. Store at 40°F to 75°F (4°-24°C) in a covered area (out of the sun). Material should be kept in a cool dry place prior to application.

    n Color

    PF863 is transparent clear coat reference appropriate specification for details.

    PF863 may be used as a top-coat or applied direct to concrete. Concrete must be ground to an ICRI CSP-2 profile or the equivalent of 30-60-grit sandpaper. This profile is achieved with a surface grinder equipped with metal bond diamonds.

    n Mixing

    Maintaining a consistent storage temperature prior to application will maximize working time.

     

    Mixing Part A with Part B

    Mix part A and part B in equal parts (1:1) using a clean, dry working vessel. Use a paddle mixer on slow speed for 2 minutes. Avoid over-mixing or creating a vortex that would introduce air. Do not mix below the dew point, which will shorten the pot life. No induction time is required prior to use. If micro-media agents are to be incorporated, they are to be added after thoroughly mixing A and B.

     

    Service mail: sales@perflex.com.cn 

    Polyaspartic Flooring Topcoat PF863 0

    Contact Details
    Perflex Novel Materials Changsha Co.,Ltd

    Contact Person: Ms. Laura

    Tel: 18390992093

    Fax: 86-731-83307125

    Send your inquiry directly to us
    Perflex Novel Materials Changsha Co.,Ltd
    Baofeng Industrial Zone, Shashi County, Liuyang, Changsha City, Hunan
    Tel:86-183-9099-2093
    Mobile Site Privacy Policy China Good Quality Cartridge Polypro Tile Grout P-30 Supplier. Copyright © 2018 - 2021 perflextilegrout.com. All Rights Reserved. Developed by ECER