First of all, we need to determine the size of the construction area, the specification of the ceramic tile, the width and depth of the gap, which must be calculated before we purchase the tile grout If the double pipe tile grout is purchased, the construction shall be carried out according to 400g / group, and the depth and width of the joint shall be within 2-3mm, and then the number of groups of tile grout may be calculated according to the size of the ceramic tile.
Figure out how much area a group can use.
For 30 * 30 tiles, about 5 square meters will be constructed for a group of about for 30 * 60 tiles, about 7 square meters will be constructed for a group of about for 40 * 40 tiles, about 6 square meters will be constructed for a group of about for 50 * 50 tiles, about 9 square meters will be constructed for a group of about for 60 * 60 tiles, about 10 square meters will be constructed for a group of about80 * 80 tiles, a group of tile grout construction about 13 square meters.
P refers to the sewing agent used by the chief engineer
C is the length of a tile
K is the width of a tile
S is the area of construction
40 is the number of meters that can be constructed by a group of double pipe joint beautifying agents
Of course, the formula is fixed, people are alive, and other variables should be considered during construction, so there is no way to provide a very accurate construction amount.
In addition, the price of each brand is different. In general, the price of some famous brands of tile grout is relatively higher, but the quality and after-sales are relatively reliable, safe and reliable to use. And the cheap tile grout it’s not good without thinking.