We know that the freezing point of the water is 0 degree. Some owners are worried that if the construction site is 0 degree or below, the materials for the joints will freeze. In winter, the air temperature outside the room is low, but the indoor construction site is less than 0 ℃. Professional worker usually uses electric heater to raise the room temperature for reconstruction. High quality tile grout,so the owner has no need to worry about this problem.If the temperature is too low, the worker can heat up the products in hot water to ensure that the curing agent and pigment from A and B pipes are evenly mixed and the construction effect is ensured.
2.If The Temperature Is Too Tow, How Long Is The Curing And Cleaning Time Suitable For The Remaining Materials?
Under normal temperature, the curing time of the residual material is 3-5 hours, and it will dry out after 24 hours. In winter, the temperature is low, and the curing time of the residual material needs to be extended moderately. The professional experienced worker will make an accurate judgment of the curing time according to the temperature and humidity of the construction site, so that the residual material can be cleaned without scratching the tiles.For high-quality brand products, if it is found that some areas are not well cured during cleaning, wipe them with alcohol, and then clean the remaining glue grouting thoroughly at one time.
3.How To Grout The Wet And Rainy City Gaps In Winter?
In winter, there is no collective heating in southern cities, and indoor and outdoor humidity is more serious than in the north.Under the wet and rainy environment in winter, the joints shall be made in a beautiful way. During construction, the windows shall be closed and two problems shall be paid attention to. First, the sundries cleaned out per centimeter shall be carefully observed to see if they are wet. If there is a wet gap, it must be blown and dried with a professional high-pressure machine (hair dryer); second, the time for curing and cleaning the residual materials shall be controlled flexibly.It's better to work on sunny day.
4. How Long Does It Take To Make Grouting After The Tiles Are Just Laid At Home?
In general, after laying bricks for 3-7 days, You can make grouting. In case of rain and snow, the professional worker will choose a relatively wet washroom with small area for the grouting test. After passing the test, the grouting can be made in large area.
5. Can The Old House Grout If The Ground Wall Brick Have Anti Alkali Phenomenon?
Sure.However, it is necessary to treat the anti alkali joint well before grouting . The specific treatment method is to clean the anti alkali joint and dry it thoroughly. Otherwise, the alkali will return to the surface of the tiles after grouting, then It will result in the weak grouting and rework.