China EPOXY TILE GROUT manufacturer
Perflex Novel Materials Changsha Co.,Ltd

Grouing & tiling system researcher and provider
Join Us:


PERFLEX Epoxy Solvent Free Base coat PE-3101 <Zero VOC, Good permeability >

PERFLEX Epoxy Solvent Free Base coat PE-3101 <Zero VOC, Good permeability >

  • PERFLEX Epoxy Solvent Free Base coat PE-3101 &lt;Zero VOC, Good permeability &gt;
PERFLEX Epoxy Solvent Free Base coat PE-3101 &lt;Zero VOC, Good permeability &gt;
Product Details:
Place of Origin: China
Brand Name: Perflex
Certification: ISO14001:2004/ISO9001:2008
Model Number: PF864
Payment & Shipping Terms:
Minimum Order Quantity: 10kg
Packaging Details: Part A/B: 20kgs pail
Delivery Time: 7days
Payment Terms: T/T or L/C at sight
Supply Ability: 2000Ton/year
Contact Now
Detailed Product Description
Materials: Polyaspartic Flooring

 Epoxy Solvent Free Primer PE-3101





Epoxy Solvent Free Primer PE-3101




This is a two component amine cured solvent free epoxy coating. It is a easy to apply product,has high permeability to concrete.

Application: designed for the concrete site with VOC emission restriction,used as primer on concrete.

Color: transparent clear

PERFLEX Epoxy Solvent Free Base coat PE-3101 <Zero VOC, Good permeability > 0



Viscosity after mixing(25℃) : 500MPaS
Potlife(25℃) : 20 Minutes
Surface (touch) dry : 6 Hours
Walk-on-dry : 16 Hours
Recoat window : 6 Hours
Adhesion to concrete : 3 MPA



Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc. Coverage on Non slip aggregate would reduce considerably.


  • Surface preparation


To secure lasting adhesion to the subsequent product, all surfaces shall be clean, dry and free from any contamination.


Laitance deposits are best removed by Planetary diamond disc grinder or by captive blasting followed by vacuum cleaning to remove dust debris. For old concrete, PERFLEX technical team should visit the site and appropriate surface preparation methodology should be recommended and that is to be followed.


  • Constrution methods


The product can be applied by Brush : Use a stiff nylon brush. Recommended to paint corners and edges. Roller: Recommended.


Conditions during application :

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 4 % (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.


This product should not be applied on to the surfaces which are known to, or likely to suffer from rising dampness, potential osmosis problems or have a relative humidity greater than 80% as measured in accordance with BS 8203 Appendix A.


Product mixing ratio (by volume)




Use a slow speed drill and mixing paddle. Pour the full contents of the mixed material onto

the floor immediately after mixing is completed. The temperature of base and curing agent is recommended to be 18 °C or higher when the paint is mixed.



The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.



This product is for professional use only. The applicators and operators shall be trained, experienced and have the capability and equipment to mix/stir and apply the coatings correctly and according to PERFLEX's technical documentation. Applicators and operators shall use appropriate personal protection equipment when using this product. This guideline is given based on the current knowledge of the product. Any suggested deviation to suit the site conditions shall be forwarded to the responsible PERFLEX representative for approval before commencing the work.


Service mail: 

PERFLEX Epoxy Solvent Free Base coat PE-3101 <Zero VOC, Good permeability > 1

Contact Details
Perflex Novel Materials Changsha Co.,Ltd

Contact Person: Ms. Laura

Tel: 18390992093

Fax: 86-731-83307125

Send your inquiry directly to us
Perflex Novel Materials Changsha Co.,Ltd
Baofeng Industrial Zone, Shashi County, Liuyang, Changsha City, Hunan
Mobile Site Privacy PolicyChina POLYASPARTIC FLOORING Supplier. Copyright © 2018 - 2023 All Rights Reserved. Developed by ECER