P-20 Sand Matt Cartridge Epoxy Tile Grout Stain Resistance, Anti-mould, Easy to clean, waterproof

P-20 TDS Epoxy Grout.pdf

INTRODUCTION

^{Sanded Epoxy Tile Grout P-20 is a two-component epoxy joint grout, made of high-tech polymer epoxy resin with fine sand, hardener, high-grade pigments and additives. It is a semi-fluid liquid, packed into two-component plastic cartridge packaging, it can easily operate by automatic caulking gun. Sanded Epoxy Grout P-20 has matt, elegant color and natural sanded cement look, such as each color is same natural look as cement grout but significantly anti-mildew, stain resistance, the color also fits the natural overall decorative design.}

​MECHANICAL PROPERTY

BANKGROUND

^{The common epoxy cement grout is more laborious to mix A+B with bare hands. The color sand that has been stirred evenly needs to be used up within the specified time and can't be kept for the next use; the time of complete curing is longer, and cleaning after curing will be a little more troublesome. PERFLEX Sanded Epoxy Tile Grout is a revolutionary ready to go product perfectly solve the difficult grouting construction with the same feature as cement sand epoxy tile grout}

APPLICATION

^{Perflex Epoxy Grout P-20 is suitable for bonding, filling and beautifying the joint of ceramic or stone building materials such as ceramic tile floor, ceramic tile wall, washbasin, bathtub, toilet, kitchen table, door-crossing stone, etc.}

^{1- Waterproof, mouldproof, stain resistance, anti-bacteria, easy to clean.}

^{2- Apply high grade polymer resin and the curing reaction of copolymerization system, effectively prevent water infill into the gap, solve black, mildew and leaking problem of the bath crock, implement, lavabo, mesa, and basins around the kitchen utensils and appliances, sanitary ware.}

^{Durable colorful colors, bright and smooth. If infected with besmirch, just clean gently with wet cloth,nglossing all the time always like a new one.}

^{3- High hardness, no shrinkage, hard and dense after curing, can be used as marble glue.}

^{4- Easy grouting by caulking gun, labor and time saving.}

CONSTRUCTION METHOD

^{1. After the mortar solidified, the ceramic tile crevice must be cleaned, the impurities and dust in the ceramic tile crevice must be cleaned up with wallpaper knife and vacuum cleaner.}

^{2. Use cleaning wax on both sides of the gap beforehand with proper amount, pay attention not to wipe wax into the gap.}

^{3. Twist the tube cap, install it on the head of the double-tube sealant, cut the spiral rubber nozzle obliquely at the head by 45 degrees (the opening size depends on the size of the tile seam), and then install it in the rubber gun.}

^{4. Extrude about 20 cm colloid (in order to mix it fully and remove bubbles), then inject the glue into the crevice of ceramic tile.}

^{5. Press the ready glue on the crevice with with the seam press or steel ball.}

^{6. After 4-24 hours (depending on the temperature), the glue cures completely, scrape off the excess glue on both sides of the gap with a scraper.}

Perflex Cartidge Tile Grout is the perfect choice to replace traditional tile grout !

New Opportunity, New Challenge